The Smok IPX 80 kit features IP67 protection, an 80 watt maximum output and a huge, 3000 mAh built-in battery. Utilising the RPM 2 coils, this pod mod device can boast rich, stunning vapour and flavour for both mouth to lung and direct to lung vaping. Created with a 0.96-inch display, which shows you all your vaping information, and dual air-inlet rings allow for easy adjustments.

Grey | Blue | Black Carbon Fibre
Brown | Red | Fluid 7-Colour
Fluid Black Grey

The IP67 technology protects the IPX 80 from splashes of water, dust, shaking and accidental drops from a height.

The Smok IPX 80 ranges from 1W-80W and can be adjusted with the up and down buttons allowing you to tailor the wattage to your preference.

A 0.96-inch screen accurately relays your real-time and relevant data, such as your puff count, puff length, wattage, battery percentage and more.

The moment you activate the IPX 80, the moment flavour is delivered. The 0.001s firing speed pushes a perfect vaping experience.

The silicone works to enhance the stability, providing the IPX 80 with layers and preventing fingerprint marks.

The 3000 mAh built-in battery, designed for endurance and stability, can be charged with a USB Type-C cable.

The SMOK IPX 80 pod mod kit is compatible with both RPM and RPM 2 pods. Each pod is designed to be used with a different coil and is not cross-compatible with each another.

The IPX 80 comes with an RPM 2 pod, which works with Smok RPM 2 coils.

The IPX 80 RPM pod (available separately) works with Smok RPM coils.

The flatter the mouthpiece is, the less likely there is to be leakage spilling into your mouth.

An interesting air-inlet ring can be rotated to the left to increase the air intake and to the right to decrease air intake.

Included with the Smok IPX 80 is an RPM 2 0.16ohm mesh coil and an RPM 2 0.6ohm MTL dual coil.

Featuring five safety protections, including:
Lithium Battery Protection | Atomiser Detection
8 Second Cut-Off | Short Circuit Protection
Low Voltage Protection

To fill this pod mod kit with e-liquid, simply remove the pod, pull out the rubber plug, fill with e-liquid and then firmly close the plug.

Included with the IPX 80 kit is an IPX 80 device, an IPX 80 RPM 2 pod, an RPM 2 0.16 Mesh coil, an RPM 2 0.6ohm MTL Dual coil, a USB Type-C cable and a user manual.

Depending on how many cigarettes you smoke, we recommend the following strength e-liquids with this kit:
1 to 5 Cigarettes a day - Choose 3mg of traditional nicotine
6 to 14 Cigarettes a day - Choose 6mg traditional nicotine or 10mg Nic Salt
15+ Cigarettes a day - Choose 12mg traditional nicotine or 20mg Nic Salt
Not sure what Nic Salts are? See our guide here.